Bizfon 7000 Specifications download pdf (Page 7)

Installation Instructions

50 Stiles Road • Salem, NH 03079 • Toll Free 1-800-260-5793 • 603-870-9400 • www.Bizfon.com

Revised: August 5, 2005 Page 5

4 Mechanical

4.1 Tabletop or Shelf Placement

To install the Bizfon 7000 on a tabletop or shelf:

1. Remove the four rubber feet from the Accessory Kit.

2. Turn over the chassis and notice the circles on each corner.

3. Remove the paper backing from each rubber foot and place one foot in each circle.

4.2 Rack Mount

To install the Bizfon 7000 in a standard 19 inch equipment rack:

1. Remove the two brackets and associated screws from the Accessory Kit.

2. Place the brackets so that the smaller faces extend away from the front of the unit as shown in Figure 3.

Figure 3: Rack Mount Bracket Installation

3. Install the mounting brackets on each side of the chassis using four 8-32 flat head screws.

4. Perform the electrical installation as shown in the instructions below before placing the chassis into the

rack.

4.3 Wall Mount

To mount the Bizfon 7000 on a wall:

1. Verify that there is sufficient clearance around the server’s front and rear panels to allow power, network,

and telephony connections.

2. Remove the two brackets and associated screws from the Accessory Kit.

3. Place the brackets so that the smaller faces extend away from the bottom of the unit as shown in Figure 4.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

Bizfon 7000 Specifications Page 7